ABS Plastic Hand Shower Head
1. water saving shower head
2. High Quality
3. Certification: CE, BV, ISO
Specification of ABS Plastic Hand Shower Head
1.Material ABS Plastic
2.Surface Finishing Polish Chrome plated
3.Cetification CE, BV, ISO9001:2008
4.Working Temperature 0°c – 90°c
5.Working Pressure 0.2MPa – 0.8MPa
6.Water outlet 6L per Min
7.Testing 100% leakage test
9.Warranty 3 year
Samples Time of ABS Plastic Hand Shower Head
Free to provide samples within 2-5 working days
1) Any inquiries will be repliedd within 24 hours
2) Professional Manufacturer
Packing of ABS Plastic Hand Shower Head
1-Bubble bag packing as common packing
2-Colour box,blister packing also can be chose
3-We also can accept customer’s packing requirement and design,but MOQ is 3000pcs for packing
4-Use strong export cartons
Installing and Demounting Method of ABS Plastic Hand Shower Head
1.Install the hand shower and hose. The round nut shall be locked to the handle of the hand shower, with the hexagon nut on the other end clocked tightly to the water tap.
2.The clockwise direction is the revolving direction when installing.
3.A washier shall be adopted between the hand shower and the hose. If water leakage occurs, please check if the washer exists in the hose connector.
4.The in-use hand shower shall be revolved to left when demounting. If the handle skids, rubber the anti-skid tools as gloves etc. may be used to reach the effect of skid resistant. When demounting, make sure holding tightly the body of the handle.
5.After install the germanium ball and the medical stone hand shower into the hand shower , it can be ready for use. If it is VC hand shower , please put the eyelet on the upper side of the VC duct into the stainless steel cylinder in the screw thread in the head of the hand shower, to ensure the VC duct can rotate easily.